MOISTURE EXUDATION INDICATOR WITH BRONZE RING
The automatic indicator package. With this solution the equipment automatically lights a signal to confirm the presence of free water is detected around the circumference of the mold. This unit is very useful in automating the R-Value test or when the testing machine design inhibits visual observation of the back side of the mold. A separate LED indicates when test condition is complete. A contact closure output is also available to interface with control electronics when test condition is complete.
Equipment included: Indicator Unit, Detection Plate with a bronze ring, an external power supply, required cables, and two Phosphorous Bronze Discs. Electrical supply: 1Ph 110 V 50/60 Hz
MOISTURE EXUDATION INDICATOR WITHOUT BRONZE RING
The manual indicator package. This solution does not include a bronze ring on the detection plate. This solution requires the operator to continuously check around the bottom circumference of the mold for free water exuding from under the mold to the outside. This is a special order item.
Equipment included: Indicator Unit, Detection Plate, an external power supply, required cables, and two Phosphorous Bronze Discs. Electrical supply: 1Ph 110 V 50/60 Hz
|Electrical Supply||1Ph 110V 50/60 Hz||1Ph 110V 50/60 Hz|