Core Drilling Equipment Range

Z

Conform to AASHTO and EN standards

Z

Ideal for coring concrete and asphalt surfaces

Z

Simple to use, cost efficient and proven design

Z

Rigid, stable & vibration free operating platforms

To carry out any form of testing requires straight & clean sided core samples. Vibration of a diamond core drill during the coring process will result in a badly finished core that will need to be ‘dressed’ before any meaningful testing can be carried out. In addition vibration of a core drill will also quickly damage the diamond cutting face by erosion of the individual diamonds resulting in rapid wear rates. Coring should always be carried out using a rigid, stable & vibration free operating platforms to ensure the integrity of core samples.

One Man On-Site Core Drilling

  • Gas engine 5.0KW
  • Drill diameters up to 200 mm (7.8 inch)
  • Drill depths up to 450 mm (23.6 inch)
  • Hand fed drill feed allows for safe coring even through steel re-inforcement bars
  • Wide variety of drill motor options
  • Fits into a small commercial van or medium size estate car
  • Water capacity 25 litres (6.6 gal)
  • Platform is operator stabilized
  • Power take-off facility for driving a hydraulic road breaker or hydraulic tamper
  • Conforms to AASHTO T 24

 

Engine Honda 5.0kW Air Cooled Petrol engine
Drill Stand De-mountable drill stand for off-trailer drilling applications
Drill Mast Standard mast with single stroke up to 600mm (23.62 inch)
Water Tank 25 litres capacity
Water Pump 12V DC driven on-board switched pump
Hydraulic Reservoir 6 litres capacity
Hydraulic Outputs 20 litres/min @ 100 bar
Drill Capacity Up to 200 mm standard (7.87 inch)
Drill Depth 600 mm maximum (23.62 inch)
Noise Level 103 dB maximum
Dimensions (LxWxH) mm (inch) 3600 x 1400 x 1250 (141.73 x 55.12 x 49.21)
Estimated Weight Kg (lbs) 30 (66.14) Stand Unit
40 (88.18) Power Unit

Log in/register to download all datasheets from Download Center.

Member Login

MEDIUM DUTY CORE DRILLING TRAILERS

  • 4 to 5 hours of normal working is possible with 10 litre (10.6 gal) fuel tank & 200 litre (52.8 gal) water tank
  • Drill diameters up to 400 mm (15.7 inch)
  • Drill depths of up to 650mm (23.6 inch) as standard with extension kits for deeper drilling
  • Hand fed drill allows for safe coring even through steel re-inforcement bars
  • 103 dB maximum noise leve
  • Power take-off facility for driving a hydraulic road breaker or hydraulic tamper

 

Prime Mover(s) Honda 9.5 kW (12.7HP) Petrol engine P12-400
Hatz 7.5 kW (10HP) Diesel engine D10-250
Drill Capacity Petrol Engine: (inch)
Standard is 50mm (1.97) to 400mm (15.74) diameter
Spacer up to 450mm (17.72) diameterDiesel Engine: (inch)
Standard is 50mm (1.97) to 200mm (7.87) diameter
Drill Stand De-mountable drill stand for off-trailer drilling applications
Drill Mast Standard mast with single stroke up to 650mm (25.59 inch)
Water Tank 200 litres
Water Pump 12 V DC driven on-board switched pump
Hydraulic Reservoir 35 litres capacity
Hydraulic Outputs 20-30 litres/min @ 140 bar
Tyres Type 145 Radial
Suspension Torsion bar to EEC specifications
Tow Hitch 50mm (1.97 inch) to EEC specification
Brakes Overrun brakes and gas assisted hand brake
Dimension (WxDxH) mm (inch) 3600 x 1400 x 1250 (141.73 x 55.12 x 49.21)
Weight (Unladen dry) Kg Petrol Engine: 490 (1080.27 lbs) (includes engine fuel and hydraulic oil)
Diesel Engine: 480 (1058.22 lbs) (includes engine fuel and hydraulic oil)
Weight (Laden dry) Kg Petrol Engine: 690 (1521.19 lbs) (includes 200 litres of water)
Diesel Engine: 680 (1499.14 lbs) (includes 200 litres of water)
Optional Extras Power take-off facility for operation of all EHTMA category hydraulic tools
De-mountable magnetic base beacon and night working lights

Log in/register to download all datasheets from Download Center.

Member Login

HEAVY DUTY CORE DRILLING TRAILERS

  • 10 hours of normal working is possible with the 27 litres (7 gal) fuel tank & 400 (105.6 gal) litre water tank
  • Drill depths of 600 mm (23.62 inch) or 1000 mm (39.3 inch) as standard with extension bars for deeper drilling
  • Proportional’ feed system allows fast & safe coring even through steel re-inforcement bars
  • ‘Automatic’ Soft Start Drilling feature ideal for in-experienced operators
  • ‘Two-function’ Emergency Stop prevents any run-on of the drill whilst the engine is stopping
  • Power take-off facility for driving a hydraulic road breaker or hydraulic tamper
  • 103 dB Maximum noise level

 

Prime Mover(s) Honda 13 kW Petrol engine P15-400
Lister 13 kW Diesel engine D-15-400
Lister 20 kW Diesel engine D20-600
Electric Start Yes
Charging System On board engine charging
Water Pump 12 V DC submersible
Water Tank 500 litres capacity
Hydraulic Reservoir 70 litres capacity
Hydraulic Outputs 22-40 litres/min @ 140 bar (13.5kW engine)
22-40 litres/min @ 200 bar (20kW engine)
Hydraulic Filtration Return line filter 25 micron
Drill Motors 11 displacements of single speed motors – Speed ranges from 55 to 1100 rpm
4 displacements of two speed motors – Speed ranges from 125 to 1000 rpm
Drill Capacity 300mm (11.81 inch) standard (600mm with additional spacer blocks)
Drill Depth 700mm (27.56 inch) standard (can be extended to 1000mm using spacer bars)
Drill Speed Infinitely variable control valve at the motor
Tyres Type 175 Radial 14C
Suspension Torsion bar to EEC specifications
Brakes Overun and gas assisted brakes
Dimension (LxWxH) mm (inch) 3300 x 1750 x 1830 for Std Mast
(Height for long mast = 2880mm)
(129.92 x 68.90 x 72.03)
Tow Hitch mm 50 (1.97 inch) to EEC specification
(75 Kg Nose Weight – Fully Laden)
Estimated Weight Kg 960 Unladen dry
1500 Laden

Log in/register to download all datasheets from Download Center.

Member Login

T4 DEDICATED CORING TRAILER

  • Lightweight Coring Trailer with approved total weight less than 740 Kgs (1631 lbs)
  • Remote control provides maximum operator safety and ease of operation
  • Simple Three Button Control complete with E-Button
  • ‘Proportional’ feed system with simple indicator lights allows for fast & safe coring
  • ‘Automatic’ Soft Start Drilling extends core barrel life & is ideal for in-experienced operators
  • 5 hours of normal working is possible with the 7 litres (1.8 gal) fuel tank & 210 litre (55.4 gal) water tank
  • Drill depths of 600 mm (23.6 inch) as standard with extension bars for deeper drilling
  • Drill diameters up to 250 mm (9.8 inch)
  • 94 dB Maximum noise level
  • PTO facility suitable for operation of hydraulic tools / tamper

 

Engine Honda petrol or Hatz diesel engines 9.0kW
Fuel Tank 7 litres (sufficient for 5 hours of normal working)
Water Pump 12v D.C on board
Water Tank 200 litres capacity (sufficient for 4 to 5 hours of normal working)
Hydraulic Reservoir 14 litres capacity
Hydraulic Outputs 28 l/min @ 130 bar
Suspension/Tyres Torsion bar (EEC specification)/Tyres 145 R
Drill Diameter Up to 250mm (9.84 inch) in concrete or asphalt
Drill Depth Up to 600mm (23.62 inch) in one stroke with extension bars for deeper drilling
Electric Connection EEC 13 pin c/w 7 pin adaptor
Tow Hitch mm 50 (65 kg Nose Weight – Fully Laden)
13 pin/7 pin light connector
Dimensions (LxWxH) mm (inch) 3300 x 1390 x 2130 (129.92 x 54.72 x 83.86)
Estimated Weight Kg (lbs) 500 (1102.31) Unladen
700 (1543.24) Laden

Log in/register to download all datasheets from Download Center.

Member Login

LABORATORY DRILL STANDS

  • Petrol engine 5.2KW hydraulic version, 2KW Electrical version
  • Rigid floor fixing and water swivel that ensures flow of coolant to drill tips
  • Drill diameters up to 110 mm (4.3 inch)
  • Drill depths up to 500 mm (19.6 inch)
  • Wide variety of hydraulic or electrical drill motor options
  • Electrically pumped water feed is available when using a hydraulic drill motor
  • All units supplied with water swivel
  • Platform allows for rigid floor mounting

 

Electric Drill Supply 110-120 Volt or 220-240 Volt frequency supply 50-60Hz available
Hydraulic Drill Supply 20 litres per minute @ 100 bars
Electric Drill Speed Three rotational speeds available 450 rpm, 1000 rpm or 2000 rpm
Water Swivel Adjustable water feed control
Drill Bit Capacity 110 mm (4.33 inch) maximum
Drill Bit Length 450 mm (17.72 inch) maximum
Water Supply Adjustable water tap c/w input hose
Tank Size (WxDxH) mm (inch) 400 x 420 x 300 (15.75 x 16.54 x 11.81)
Tank Drain BSP connection for water drain facility
Dimension (WxDxH) mm (inch) 460 x 470 x 1016 (18.11 x 18.50 x 40)
Estimated Weight Kg 50 (110 lbs)

Log in/register to download all datasheets from Download Center.

Member Login

Quick Inquiry
Please complete the form below

Name*

Email*

Telephone*

Company*

Country*

Inquiry*